Dimensions: 10.0 x 7.3 x 1.9 inches (255 x 185 x 48mm)
Weight: 5 lbs (2.3 kg)
Colour Options: Pure White Powder coat or Anodised Silver
10 x Cree XM-L white
4 x Cree XP-G Blue (465-485 nm)
4 x Cree XP-G Royal Blue (450-465 nm)
2 x Special 7000-8000° Kelvin LEDs
Loss-free 120º optics without beam forming
Total Output: 66 watts
Optimal Surface area light spread (please see notes below)*
Cooling: Active temperature control
Safety: Temporary LED shutdown on overheating (whilst cooling)
Power Supply 110-240v AC (50-60Hz)
Colour Options: Anodised Aluminium or 'Pure' White high gloss Powder-coat (no additional charge)
* Surface area spread can be increased / decreased by raising / lowering the unit in relation to the aquariums water surface. however a subsequent gain or loss in overall intensity will be encountered as a result. Manual adjustment of intensity is still applicable on all channels via the Light units programmable options. The following however is a general guide as to light spread and overall intensity dependent on distance that the unit is placed from the water surface with all channels at 100%.
20 x 20 inches (peak intensity) = ideal for specialised shallow water SPS species and clams requiring very high intensity.
24 x 24 inches. (moderate - high intensity) = Ideal for mixed reef consisting SPS and clams in upper regions, and deep water SPS and LPS in lower regions mixed with various soft polyp mushrooms etc.
Note: care should be taken when converting existing stock to LED from other light sources. It is advised that all units be set to no more than 50% on all channels initially, and that livestock is closely observed for signs of paling/bleaching before slowly increasing intensity over several weekly increments.