Aqua.c1ub.net
*
  Wed 19/Aug/2026
หน้า: 1   ลงล่าง
พิมพ์
ผู้เขียน หัวข้อ: อยากได้ข้อมูลเกี่ยวกับไฟledครับ  (อ่าน 633 ครั้ง)
freedomlife ออฟไลน์
Club Member
« เมื่อ: 30/03/13, [09:53:33] »
ตอบโดยอ้างถึงข้อความ

อยากรู้ว่าตู้ผม36×18×18 มีแต่ปลากับ แอนพรมแล้วก็แอนทรายครับมีledตัวไหนบ้างที่เลี้ยงแอนได้ในระยะยาวครับ ขอข้อมูลโดยละเอียดหน่อยนะครับ เพราะอ่านเก็บความรู้จากในกระทู้ต่างๆแล้วรู้สึกว่า ในระยะยาวแล้วไฟledจะคุ้มค่ากว่าในหลายๆด้าน รบกวนผู้รู้เกี่ยวกับระบบไฟledที่ใช้ในตู้ทะเลโดยตรงเข้ามาแชร์ความรู้ทีนะครับ  ขอบคุณมากครับ [on_066] [on_066] [on_066]
Omukung_RDbee ออฟไลน์
Club Member
« ตอบ #1 เมื่อ: 30/03/13, [10:23:23] »
ตอบโดยอ้างถึงข้อความ

แนะนำเป็นของ giseman (สะกดถูกไหมนะ) เอาเป็นว่าราคาประมาณสองหมื่น(ต่อรองได้)ร้านน้องเอ๋ตรงข้ามกับทางเข้าสวนสมเด็จฝั่งพิพิธภัณฑ์เด็กอะครับ  ดีชัวร์และไม่มั่วนิ่มก่อนหน้านี้ก็เจอของ ecothec  หลอด led ของ cree ดี ณ ตอนนี้ ผมก็อยากได้แต่มีเงินพอ  เก็บเงินดีกว่า   ลองพิจารณาดูนะครับ   asspain
Pongsatorn35 ออฟไลน์
Club Brother
« ตอบ #2 เมื่อ: 30/03/13, [10:29:16] »
ตอบโดยอ้างถึงข้อความ

ปัญหาคือเหมือนจะต้องใช้2โคมนะสิครับ ถ้าเป็นของพวกEco หรือ sunledking ค่าไฟมั่นใจว่าใช้ได้ตามสเปคของเค้าตู้ก้ไม่ได้ลึก ถ้าจะใช้ของยี่ห้อพวกนี้คงต้องใช้2โคมมั้งครับเพราะไม่ทั่วตู้แน่ ลองดู http://aqua.c1ub.net/forum/index.php?topic=203773.0 ของคุณปั้มมั่นใจว่าสเปคดีกว่าsunledking cidly ecolamp
ปล.ก่อนซื้อศึกษาก่อนนะครับledโดนต้มกันมาเยอะ
Pongsatorn35 ออฟไลน์
Club Brother
« ตอบ #3 เมื่อ: 30/03/13, [10:40:49] »
ตอบโดยอ้างถึงข้อความ

แนะนำเป็นของ giseman (สะกดถูกไหมนะ) เอาเป็นว่าราคาประมาณสองหมื่น(ต่อรองได้)ร้านน้องเอ๋ตรงข้ามกับทางเข้าสวนสมเด็จฝั่งพิพิธภัณฑ์เด็กอะครับ  ดีชัวร์และไม่มั่วนิ่มก่อนหน้านี้ก็เจอของ ecothec  หลอด led ของ cree ดี ณ ตอนนี้ ผมก็อยากได้แต่มีเงินพอ  เก็บเงินดีกว่า   ลองพิจารณาดูนะครับ   asspain
Specifications:

Dimensions: 10.0 x 7.3 x 1.9 inches (255 x 185 x 48mm)

Weight: 5 lbs (2.3 kg)

Colour Options: Pure White Powder coat or Anodised Silver

10 x Cree XM-L white

4 x Cree XP-G Blue (465-485 nm)

4 x Cree XP-G Royal Blue (450-465 nm)

2 x Special 7000-8000° Kelvin LEDs

Loss-free 120º optics without beam forming

Total Output: 66 watts

Optimal Surface area light spread (please see notes below)*

Cooling: Active temperature control

Safety: Temporary LED shutdown on overheating (whilst cooling)

Power Supply 110-240v AC (50-60Hz)

Colour Options: Anodised Aluminium or 'Pure' White high gloss Powder-coat (no additional charge)

* Surface area spread can be increased / decreased by raising / lowering the unit in relation to the aquariums water surface. however a subsequent gain or loss in overall intensity will be encountered as a result. Manual adjustment of intensity is still applicable on all channels via the Light units programmable options. The following however is a general guide as to light spread and overall intensity dependent on distance that the unit is placed from the water surface with all channels at 100%.

20 x 20 inches (peak intensity) = ideal for specialised shallow water SPS species and clams requiring very high intensity.

24 x 24 inches. (moderate - high intensity) = Ideal for mixed reef consisting  SPS and clams in upper regions, and deep water SPS and LPS in lower regions mixed with various soft polyp mushrooms etc.

Note: care should be taken when converting existing stock to LED from other light sources. It is advised that all units be set  to no more than 50% on all channels initially, and that livestock is closely observed for signs of paling/bleaching before slowly increasing intensity over several weekly increments.

 
อันนี้คือสเปคของgiesemann ผมว่าถ้าทำสเปคได้เท่านี้สองหมื่นไม่คุ้มครับ เพียงแต่ลูกเล่นเยอะ(ส่วนใหญ่ค่าตั้งเวลาก็พอไม่รู้จะเยอะทำไม) สวยงามเหมาะแก่ตู้ตั้งโชว์เก๋ๆ สเปคค่าแสงไม่ได้หนีพวกcidly หรือ sunledkingที่ราคาต่ำกว่ามาก ยังไงผมก็เชียร์ของไทยๆ ลองศึกษาเรื่องสเปคของความต้องการของปะการังดูนะครับ แต่บอกก่อนเลยว่าของgiesemannใช้ได้ครับเลี้ยงโตได้แต่ช้าหน่อย สีเพี้ยงบ้างเล็กน้อย
หน้า: 1   ขึ้นบน
พิมพ์
กระโดดไป: